THE AIR PRESSURE OF THE GENTLETENT PRODUCTS


GentleTent products are specially known for their unique and particular air constructions. These constructions are the reason for the exclusive look and comfortable form of the inflatable camping tents, awnings, the roof top tent and the microcaravan B TURTLE. This means: no sloping edges or any other annoying poles or tubes. The special constructions form an extra room height, which gives the GT products their extraordinary room climate.

All tent constructions relay on a two-layer chamber system, while for the air platforms drop stitch material is used.

Questions such as "When is there enough air in the pipes? or "How much do I have to inflate the Drop-Stitch mat?" or hints on what it means when products are equipped with protective pressure relief valves are answered here.

What to know about the air pressure of GentleTent products

The air pressure of GentleTent tent constructions

The tube system of the inflatable camping tents or awnings, or as well as the tent constructions of the roof tent or the B TURTLE, have a diameter from about 14cm. The tube system has two-layers: On the outside it’s covered by tear-resistant Cordura material, while on the inside are tubes out of UV-resistant TPU

Due to the big cross section of the tubes a low air pressure is needed. Depending on the product an air pressure between 0,2 to 0,3 bar (2,9 to 4,3 PSI) is required.

The GT products have two valves and a relief valve or no relief valve. A relief valve protects the air chambers, if there’s too much air pressure. For example, if the volume changes, the relief valve would leak air out automatically.

Volume changes appear because of temperature fluctuation. If there are big temperature fluctuations between day and night air pressure can decrease that much, that sometimes after sunset you may have to refill some air. On the other hand, if there is strong sunshine during the day air pressure rises. But, this problem handles the relief valve. If no relief valve exists, release air yourself.

If there is just a low temperature fluctuation in the summer air refilling is not necessary. To guarantee the ideal pressure it’s recommended to build up the tent during the hottest time of the day.

How do I know if there is enough air inside the tube system?

Because there are only 0,2 to 0,3 bar necessary, the air pressure can be checked by hand. If the tube feels firm and hard you can stop air filling.

The air pressure of the GentleTent drop stitch mattress

The air pressure of the GentleTent drop stitch mattress, which is used by the roof top tent GT ROOF or the B TURTLE, is higher than it is with the GentleTent tent constructions. To guarantee the required stability the air pressure should be between 0,6 and 0,8 bar (8,7 to 11,6 PSI).

How do I know if there is enough air inside the drop stitch mattress?

The best case is to control the air pressure with a display on the pump. To control air pressure by hand the drop stitch mattress should feel very firm and tight. If you press strongly with your thumb against the mattress it should yield just a few millimeters.